3M™ | SKU: VEL-6001

1" 3M™ Adhesive-Backed Hook Fastener Tape

$4.44 CAD

Specifications

Application: Apply adhesive-backed products at temperatures above 68 °F (20 °C) to clean, smooth, dry surfaces free of oils, mold-release agents, and contaminants. For best adhesion, clean the substrate with a 50/50 isopropyl alcohol/water solution, heptane, or MEK and allow it to dry. After liner removal, avoid touching the adhesive, apply with firm roller pressure, and allow adequate dwell time before loading. To reduce edge lifting, round corners or recess the product into the substrate.
Content: 100% Nylon
Adhesive: 3M acrylic-based pressure-sensitive adhesive
Fire Retardancy: Meets the requirements of F.A.R. 25.853(b)(3) and FMVSS 302 when unattached, and F.A.R. 25.853(b), (b)(2), (b)(3), and FMVSS 302 when bonded to a thin metal panel.
Cold Crack Resistance: -28 °C (-18 °F)
Shear Strength (Dynamic): 4.8 psi (33 kPa)
Peel Strength (90° Flexible-to-Rigid): 1.8 lb/in (313.2 g/cm)
T-Peel Strength: 1.3 lb/in (223.1 g/cm)
Minimum Dwell Time: 48 hours
Full Bond Strength: 72 hours
Thickness: 2.4 mm (94 mil)
Width: 1" wide
Roll Size: 150 ft
Applications: Used in automotive, aircraft, electronics, and business equipment industries. Suitable for anti-scratch surfaces, interior trim, medical braces, truck tonneau covers, equipment mounting, vibration and sound dampening, and marine applications.

Premium 3M™ adhesive-backed hook fastener tape for heavy-duty indoor and outdoor applications. 1" wide.

Note: Both sides (hook and loop) are required to create a complete fastening system.

Sold per foot.